Best Elastomers Private Limited

Industrial Polyurethane Cones are high-durability components used for impact absorption, noise reduction, and wear protection in various heavy-duty industrial applications. Made from premium-grade polyurethane, these cones offer excellent resistance to abrasion, chemicals, and mechanical stress. They are commonly used in vibratory feeders, screening machines, material flow systems, and mining or aggregate handling equipment to control flow, cushion impacts, and extend the life of surrounding parts.

• In pulp and paper mills to remove sand, staples, plastic particles and other contaminants.
• In the drilling industry to separate sand from the expensive clay that is used for lubrication during the drilling.
• In industry to separate oil from water or vice versa.
• In metal working to separate metal particles from cooling liquid.
• In potato processing plants to recover starch from waste water.
• In mineral processing, hydrocyclones are used extensively both to classify particles for recirculation in grinding circuits and to differentiate between the economic mineral and gangue.
• To remove sand and silt particles from irrigation water for drip irrigation purposes.
• Cyclonic separation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream.
• A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then falling to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.

We are a trusted PU hydrocyclone manufacturer, offering high-performance polyurethane hydrocyclones designed for efficient separation and long service life. Made from premium wear-resistant PU, our hydrocyclones ensure reliable operation in mining, sand washing, and industrial processing applications. Durable, low-maintenance, and customizable for your requirements.