Best Elastomers Private Limited

Industrial Polyurethane Cones are high-durability components used for impact absorption, noise reduction, and wear protection in various heavy-duty industrial applications. Made from premium-grade polyurethane, these cones offer excellent resistance to abrasion, chemicals, and mechanical stress. They are commonly used in vibratory feeders, screening machines, material flow systems, and mining or aggregate handling equipment to control flow, cushion impacts, and extend the life of surrounding parts.

PU Lining on Hydrocyclone refers to the application of high-performance polyurethane lining inside hydrocyclone bodies to protect against wear caused by abrasive slurries and high-velocity particle flow. This lining significantly enhances the hydrocyclone’s service life by offering superior resistance to corrosion, impact, and abrasion. Commonly used in mining, mineral processing, and sand washing industries, PU linings ensure smoother operation, reduced maintenance costs, and improved separation efficiency under demanding working conditions.

A Odimax Hydrocyclone is most often used to separate "heavies" from a liquid mixture originating at a centrifugal pump or some other continuous source of pressurized liquid. A hydrocyclone is most likely to be the right choice for processes where "lights" are the greater part of the mixture and where the "heavies" settle fairly easily. Generally, hydrocyclones are used in continuous flow systems so that the instantaneous liquid inflow to the hydrocyclone is equal to the total instantaneous outflow of "lights" plus "heavies". In cases where "heavies" are a very small part of the whole liquid, it is sometimes advantageous to accumulate them in the bottom of the hydrocyclone for batch wise removal.

Applications include:

• In pulp and paper mills to remove sand, staples, plastic particles and other contaminants.
• In the drilling industry to separate sand from the expensive clay that is used for lubrication during the drilling.
• In industry to separate oil from water or vice versa.
• In metal working to separate metal particles from cooling liquid.
• In potato processing plants to recover starch from waste water.
• In mineral processing, hydrocyclones are used extensively both to classify particles for recirculation in grinding circuits and to differentiate between the economic mineral and gangue.
• To remove sand and silt particles from irrigation water for drip irrigation purposes.
• Cyclonic separation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream.
• A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then falling to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.

"Best Elastomers Pvt. Ltd." was established keeping in mind the ever-expanding demand for good quality polyurethane Products. Our products range includes Polyurethane Bushes, Polyurethane Sheets, PU Wheel, PU Coated Rolls, Polyurethane Sticks, Industrial Printing Roller.